datasheet din rail mount do not forget to visit us at: www.crydom.com copyright ? 2017 crydom inc. specifications subject to change without notice. dracn series ? 6.2mm din-rail mount (35 mm) ssr assembly ? ratings 24vdc @ 3.5a, 48vdc @ 100ma and 240vac @ 2a ? ul & cul recognized @ 40c, 100k-cycle endurance test (ssr only) ? ac output ssr is ul rated for pilot duty @ 240vac ? ce & rohs compliant ? yellow led input status indicator ? 5 & 24 vdc control output specifications (1) description operating voltage 0-24 vdc maximum load current @ 40c (2) 3.5 a minimum load current [ma] 1 maximum blocking voltage 30 vdc maximum surge current [apk] 9 a (10 ms) maximum i2t for fusing 50/60hz (1/2 cycle) [a2 sec] n.a. 0.001 maximum pwm (hz) (3) 500 maximum off-state leakage current @ rated voltage [ma] typical on-state voltage drop @ rated current (v) 0.4 product selection control voltage 3.5 a 100 ma 3-12 vdc DRA-CN024D05 dra-cn024d24 15-30 vdc dra-cn048d24 dra-cn048d05 2 a dra-cn240a24 dra-cn240a05 dra-cn024dxx 24-250 vac 2 a 70 600 vac 120/115 a (16.6/20 ms) 285/260 4.0 n.a. 1.1 dra-cn240axx 0-48 vdc 100 ma 1 60 vdc 300 ma (10 ms) n.a. 0.001 500 switch con?guration n.o. n.o. n.o. 1.0 dra-cn048dxx input specifications for cn024 (1) description control voltage range minimum turn-on voltage must turn-off voltage nominal input impedance typical input current typical turn-on time DRA-CN024D05 3-12 vdc 3.0 vdc 1.0 vdc 500 ohm 10 ma @ 5.0 vdc 120 s 120 s dra-cn024d24 15-30 vdc 15 vdc 15 vdc 2.67k ohm 2.67k ohm 350 s 80 s typical turn-off time avail abl e opt i ons required for valid part number for options only and not required for valid part number dra-cn series load voltage 024d: 24 vdc, 3.5 a 048d: 48 vdc, 0.1 a 240a: 240 vac, 2 a assembly input voltage 05: 05 vdc 24: 24vdc 024d d switching mode blank: zero cross turn-on (ac output only) r: random turn on (ac output only) 4 dc ac
datasheet din rail mount do not forget to visit us at: www.crydom.com copyright ? 2017 crydom inc. specifications subject to change without notice. input specifications for cn048 (1) input specifications for cn240 general specifications (1) dra-cn048d05 description control voltage range 3-12 vdc must turn on voltage 3.0 vdc must turn off voltage 1.0 vdc 5 vdc nominal input impedance 833 ohm typical input current 6 ma @ 5.0 vdc typical turn-on time 20 s typical turn-off time 130 s dra-cn048d24 15-30 vdc 15 vdc 3.43k ohm 7 ma @ 24 vdc 20 s 130 s dra-cn240a05 description control voltage range 3-12 vdc must turn on voltage 3.0 vdc must turn off voltage 1.0 vdc 5 vdc nominal input impedance 333 ohm typical input current 15 ma @ 5.0 vdc typical turn-on time 1/2 cycle typical turn-off time 1/2 cycle dra-cn240a24 15-30 vdc 15 vdc 3.43k ohm 7 ma @ 24 vdc 1/2 cycle 1/2 cycle (1) all parameters at 25c unless otherwise speci?ed. (2) see derate curves for more information (3) operating frequency above 500hz will damage the ssr (dc output only). (4) turn-on time for random turn-on version is 0.1msec (5) 3.75kv for cn048dxx parameters description dielectric strength, input/output (50/60hz) (5) 2.5 kv maximum capacitance, input/output 1.5 pf ambient operating temperature range -25 to 60c ambient storage temperature range weight (typical) -40 to 80c housing material 0.067 lb (31g) overvoltage category ul 94 v0 polution degree iii degree of protection (ssr encapsulation) 2 max. torque (output screws) ip67 max. wire size (load side) 5-7 in lb (0.56-0.8 nm) 24-14 awg solid or stranded general notes
datasheet din rail mount do not forget to visit us at: www.crydom.com copyright ? 2017 crydom inc. specifications subject to change without notice. thermal derate information mechanical specifications 3.5 3.0 1.0 0.5 30 20 40 50 60 no spacing 0 ambient temperature (oc) derating curve: dra-cn024dxx derating curve: dra-cn048dxx derating curve: dra-cn240axx load current (amps) 1.5 2.5 2.0 0.1 0.08 0.06 0.04 0.02 20 30 40 50 0 ambient temperature (oc) load current (amps) 60 2 1.5 1 0.5 30 40 50 60 0 ambient temperature (oc) load current (amps) 20 no spacing required 6.2 spacing no spacing 6.2 spacing tolerances: 0.02 in / 0.5 mm all dimensions are in: inches [millimeters]
datasheet din rail mount do not forget to visit us at: www.crydom.com copyright ? 2017 crydom inc. specifications subject to change without notice. agency ap provals accessories designed in accordance with the requirements of iec 62314 agency approvals e334072. ac output relay is ul rated for pilot duty @ 240vac rev. 052112 id marker strips cnlb, cnln, cnl2 blank strips part no.: cnlb a package of 10 plastic strips comprising 10 individual unprinted markers which can be placed on sockets? terminal block for easy identification during the use of multiple units. numbered 1 to 10 strips part no.: cnln a package of 10 plastic strips comprising 10 markers printed individual 1 to 10 which can be placed on sockets? terminal block for easy identification during the use of multiple units. numbered 1 to 10 strips part no.: cnl2 a package of 10 plastic strips comprising 10 markers printed individual 11 to 20 which can be placed on sockets? terminal block for easy identification during the use of multiple units.
datasheet din rail mount do not forget to visit us at: www.crydom.com copyright ? 2017 crydom inc. specifications subject to change without notice. danger / peligro / danger /gef ahr / pericolo / h a z a r d o f e l e ct ric s ho ck, e x p l o s io n, o r a r c flash. ? di s c o n n e c t a l l p o w e r b e f o r e i n s ta l l i n g o r wo r k i n g w i t h th i s equipment. ? v e r i f y a l l c o n n e c ti o n s a n d r e p l a c e a l l c o v e r s b e f o r e tu r n i n g o n p o w e r . f a ilu r e t o f o llo w t h e s e in s t r u c t io n s w ill r e s u lt in d e a t h o r s e r io u s in ju r y . rie s g o de de s c a rg a e l e ct ric a o e x p l o s io n. ? de s c o n e c ta r to d o s l o s s u m i n i s tr o s d e e n e r g i a a e s te e q u i p o a n t e s d e tr a b a j a r c o n e s te equipo. ? v e r i f i c a r to d a s l a s conexiones y colocar todas l a s ta p a s antes d e energizer el e q u i p o . e l in c u m p lim ie n t o d e e s t a s in s t r u c c io n e s p u e d e p r o v o c a r la m u e r t e o le s io n e s s e r ia s . g e f a hr e in e s e l e kt ris ch e n s chl a g e s o de r e ine r e x p l o s io n. ? s te l l e n s i e j e g l i c h e n s tr o m a b , d e r d i e s e s g e r ? t v e r s o r g t, bevor s i e a n dem g e r ? t arbeiten d u r c h f h r e n ? v o r d e m dr e h e n a u f e n e r g i e a l l e a n s c h l s s e b e r p r f e n u n d a l l e a b d e c k u n g e n e r s e t z e n. un t e r la s s u n g d ie s e r a n w e i s u n g e n k ? n n e n z u m t o d e o d e r z u s c h w e r e n v e r le t z u n g e n f h r e n. ris chio di s co s s a e l e t t ric a o de l l ?e s p l o s ione. ? s p e n g a tu tt a l ' a l i m e n ta z i o ne c h e f o r n i s c e q u e s ta a p p a r e c c h i a t ura p r i m a d i lavorare a questa a p p a r e c c h i a t ura ? v e r i f i c a r e t u tti i c o l l e g a m e n ti e s o s ti tu i r e tu tte l e coperture p r i m a d e l l ?accensione l ' o m is s io n e d i q u e s t e istruzioni p r o v o c h e r l a m o r t e o le s io n i s e r i e ? ? ? ? ? ?? ??? ? ??? ? w arning / a vertissement / w arnung /advertencia / a vvertenza / risk of m a terial damage and hot enclosure ? the product's side panels may be hot, allow the product to cool before touching. ? follow proper mounting instructions including torque values. ? do not allow liquids or foreign objects to enter this product. failure to follow these instructions can result in serious injury , or equipment damage. die nichtbeachtung dieser anweisung kann k?rperverletzung oder materialsch?den zur folge haben. gef ahr von ma terialsch?den und geh?useerhitzung ? die seitenw?nde k?nnen hei? sein. lassen sie das produkt abkhlen, bevor sie es berhren. ? beachten sie die montageanweisungen, ? fhren sie keine flssigkeiten oder fremdk?rper in das produkt ein. si no se respetan estas precauciones pueden producirse graves lesiones, da?os materiales. riesgo de da?os ma teriales y de sobrecalent amient o de la unidad ? los paneles laterales del producto pueden estar calientes. esperar que el producto se enfre antes de tocarlo. ? respetar las instrucciones de montaje, y en particular los pares de apretado. ? no dejar que penetren lquidos o cuerpos extra?os en el producto. ono la mancata osservanza di questa precauzione pu causare gravi rischi per l'incolumit personale o danni alle apparecchiature. rischio di danni ma teriali e d'involucro caldo ? i pannelli laterali dell'apparecchio poss scottare; lasciar quindi ra f freddare il prodotto prima di toccarlo. ? seguire le istruzioni di montaggio corrette. ? non far entrare liquidi o oggetti estranei in questo apparecchio. ??? ??? ???? ? ?????? ? ? ?????? ? ??? ris q u e de de s ch a rg e e l e ct riq ue o u explosion ? e te i n d r e to u te s l e s s o u r c e s d ' n e r g i e d e c e t a p p a r e i l a v a n t d e tr a v a i l l e r d e s s u s d e c e t a p p a r e i l ? vrifier tous connections, et remettre tous couverts en olace avant de mettre sous de n o n-s u iv i d e c e s in s t r u c t io n s p r o v o q u e r a la m o r t o u d e s l s io n s srieuses s r i e u s e s. risque de dommage materiel et de surchauffe du boitier ? les panneaux latraux du produit peuvent tre chauds. laisser le produit refroidir avant de le toucher. ? respecter les consignes de montage, et notamment les couples de serrage. ? ne pas laisser pntrer de liquide ni de corps trangers l'intrieur du produit. le non-respect de cette directive peut entra?ner, des lsions corporelles graves ou des dommages matriels.
datasheet din rail mount do not forget to visit us at: www.crydom.com copyright ? 2017 crydom inc. specifications subject to change without notice. annex - e n v i romental information the environmental information disclosed in this annex including the eip pollution logo are in compliance w i th people?s republic of china electronic industr y standard sj/t11364 ? 2006, marking for c ontrol of pollution caused by electronic information products. part name toxic or hazardous substance and elements lead mercury cadmium hexavalent polybrominated polybrominated (pb) (hg) (cd) chromium (cr (vi)) biphenyls (pbb) diphenyl ethers (pbde) semiconductor die solder - ? ?????????????? sj/t11364 - 2006, ?????? ??? ? ? (pb) (hg) (cd) (cr (vi)) (pbb) (pbde) ?? ? 50
|
